Click here to Close
 
打印

史上最稳定的 Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2] 新加MD5值

本主题由 dis 于 2009-2-16 21:18 设置高亮

史上最稳定的 Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2] 新加MD5值



可以解决部份驱动问题,内含PPF1&PPF2补丁!不需要打任何补丁!!!

现在为止最为稳定的版本


不赞成升级到10.4.9

现在10.5正在加紧测试中。我们不久将放出版本来测试



Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2]
Better use an IDE HDD master and a DVD Drive slave.
It can be used on sATA also but better no for first try.
Disable S.M.A.R.T. from bios.
Neaded staff:


1. Mac OS X 10.4.(1-8) Install DVD (on a DVD+ or -R NO RW!)
2. A PC with a compatible DVD drive (to install OS X)
3. First of all be sure that OSX can run on your computer before attempting anything like a dual boot.
How to:
1. Get a prepatched OSX install image (look at torrent sites for that).
2. Burn the image to an empty dvd recordable (+R or -R NO RW)
Use your favorite burn program for this (Nero, Alcohol 120%, MagicISO, PowerISO e.t.c)
3. Insert the OSX install disk and reboot your computer.
4. Boot the DVD, when the grey Apple stops spinning, select Language for the installation.
5. On the top of the screen, click “Utilities” and then click “Disk Utility”.
6. Disk Utility starts. Select your Hard Disk or Partition. Chose “erase” tab and set the Volume Format to “Mac OS extended (journaled)” and erase it.
7. Wait until the process finishes and then close Disk Utility.
8. Follow the installation steps on your screen, select the HD with the partition you made in step 6 and choose “Customize”(if have this option).
In the Installer window, select either the Intel or AMD. Choose more packages if they fit in your hardware.
9. After finishing the installation, wait for the computer to reboot, remove the install disk and enjoy your “Intel/AMD-Mac Os X (x86)” installation.


下载地址:[已更正。SORRY!]

文件大小:4.37G

MD5值:
073eb015d77bbf5e4a97d0d37ceb3855

[weiphone][Mac_OS][Mac OS X 10.4.8][JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2].iso


ftp://ftp.weiphone.com:50/MacOS/MAC_OS/[weiphone][Mac_OS][Mac OS X 10.4.8][JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2].iso


对于楼下N多位说不能下载的。有没有看顶置下载方法。已经讲得很明了!不重复

总之一点。可以下载。
附件: 您所在的用户组无法下载或查看附件
enjoy my iPhone ....WeiPhone

TOP

请问怎么不能下载这个版本,下载时候提示没有找到这个文件。
麻烦楼主能否检查一下?谢谢

TOP

下载试试.....其他的版本都没装成功哦...

TOP

这是新上传的吗?需不需要打补丁的啊?
之前我下了一个文件名跟这个一模一样的(没打补丁),安装N次不行啊....

[ 本帖最后由 wushiguo 于 2007-8-18 13:06 编辑 ]

TOP

多谢楼主了
新的地址终于可以下载了

TOP

谢谢版主分享...下了个R3装了24小时....死活装不上去...这个可以VM装吗?

TOP

救命,下载到99%有人遇到没

我用快车下到99%就下不动啦,大家是怎么解决的啊

TOP

不知道下了这个可不可以安装上

TOP

引用:
原帖由 lzihao 于 2007-8-17 20:09 发表
我用快车下到99%就下不动啦,大家是怎么解决的啊
这才几个小时啊,就99%了...
暴强啊...

TOP

試過用新的連結去下載, 但都是找不到網頁.

請幫忙. 謝謝

TOP