First, you need to make sure of a few things:
Once you have done all that, you can begin with the
TurboSIM installation process:
- Connect to your iPhone via SSH
(I'm using SFTP in my example) - Download turbo-cable-utils-iPhone-0.7.0-rev1.tar.gz
(much thanks to Zf_ who ported the binaries for iPhone) - Unzip it, and place the entire content of the folder bin-iPhone into the iPhone's /bin directory.
(You can remove the bins after you're done if you want. Ignore the folder patch.) - Give executable permission to these files. Chmod +x <filename>, or chmod permission to 0755 if you're using a client like WinSCP
- Download applesaft-0.92.tar.gz (this is the AppleSaft app for TurboSIM)
- Unzip it, go to the bin folder in the file you've just unzipped, and you will find the file applesaft.trb
- Copy applesaft.trb into your iPhone's home directory (/private/var/root)
- Disable CommCenter on your iPhone:
- Download and/or open the file /System/Library/LaunchDaemons/com.apple.CommCenter.plist on your iPhone
- Add <key>Disabled</key><true/> just above the text </dict> on the second last line
(last line being </plist>) - Save file and/or upload it back
- Restart iPhone
Now we've got all the software part settled, lets move on to some hardware fixing:
- Cut up the your own SIM card (the one you wish to use with the iPhone) until it fits the TurboSIM nicely. It is ok to cut a tiny bit more so that they'll fit nicely.
- Repeat the above process with AT&T's SIM card
- Insert the AT&T-TurboSIM combination very gently into the iPhone.
Be extra careful! The TurboSIM is notoriously brittle, and will crack if you use too much force! - Open up an SSH command terminal and enter the following command: turbo-info
- You should see a summary and OK
- Next, enter the following command: turbo-app /private/var/root/applesaft.trb
- You should see a reply with OK
- Enable CommCenter on your iPhone:
- Download and/or open the file /System/Library/LaunchDaemons/com.apple.CommCenter.plist on your iPhone
- Remove the text <key>Disabled</key><true/> you have added previously
- Save file and/or upload it back
- Restart iPhone
Now we've finally gotten the difficult parts away! The rest should be easy:
- Go to your iPhone Settings menu > Phone. You will now see a new option SIM Applications
- Select it, then select Apple Saft, and then Set
- Remove the AT&T-TurboSIM combination (gently), and insert your own SIM-TurboSIM combination (again, gently)
- Restart iPhone
- Congratulations! If you've done everything correctly, it works now!
Last Step,
Enjoy..!!!
讓開始。首先, 您需要確定幾件事:
一旦您做了所有那, 您能從
TurboSIM 安裝過程開始:
- 連接到您的iPhone 通過SSH
(我使用SFTP 在我的例子) - 下載 turbo 纜繩utils iPhone 0.7.0 rev1.tar.gz
(由於 Zf _ 誰端起了binaries 為iPhone) - 拉開它拉鏈, 和安置文件夾容器的整個內容iPhone 入iPhone 的 /bin 目錄。
(您能去除容器在您做之後如果您要。忽略文件夾 補釘。) - 給可執行的允許這些文件。 Chmod +x <filename>, 或chmod 允許到0755 如果您使用一個客戶像WinSCP
- 下載 applesaft-0.92.tar.gz (這是AppleSaft app 為TurboSIM)
- 拉開它拉鏈, 去 容器 文件夾在您拉開了拉鏈的文件, 並且您將發現文件 applesaft.trb
- 複製 applesaft.trb 入您的iPhone 的主目錄(/private/var/root)
- 使CommCenter 失去能力在您的iPhone:
- 下載並且/或者打開文件 /System/Library/LaunchDaemons/com.apple.CommCenter.plist 在您的iPhone
- 增加 <key>Disabled</key><true/> 在文本之上 </dict> 在 第二條最後線
(前條線是 </plist>) - 之外文件並且/或者上裝它
- 重新開始iPhone
現在我們有所有軟體零件被安定, 讓移動對某一硬體定像:
- 切開您自己的SIM 卡片(那個您希望使用與iPhone) 直到它恰好適合TurboSIM 。它是好削減微小的位元更以便他們恰好將適合。
- 重覆上述過程與AT&T 的SIM 卡片
- 非常柔和地插入At&t TurboSIM 組合入iPhone 。
額外小心! TurboSIM 臭名遠揚地是易碎的, 和將崩裂如果您使用許多力量! - 開放SSH 指令終端和輸入以下: turbo-info
- 您應該看總結和讚成
- 其次, 輸入以下: turbo-app /private/var/root/applesaft.trb
- 您應該看一個回復以讚成
- 使能CommCenter 在您的iPhone:
- 下載並且/或者打開文件 /System/Library/LaunchDaemons/com.apple.CommCenter.plist 在您的iPhone
- 取消您 <key>Disabled</key><true/> 早先增加了的文本
- 之外文件並且/或者上裝它
- 重新開始iPhone
我們最後現
去您的iPhone 設置菜單> 電話。您現在將看新選擇
SIM 應用
選擇它, 那麼精選的
蘋果電腦公司Saft, 和然後
設置 去除At&t TurboSIM 組合(柔和地), 和插入您自己的SIM-TurboSIM 組合(再, 柔和地)
重新開始iPhone
祝賀! 如果您正確地做了一切, 這現在有效!
[
本帖最后由 ayanatsume 于 2007-9-3 13:34 编辑 ]
深公网安备案证字第 4403101901155 号