IBOOTER (console for iBoot)
What is iBooter? iBooter is an interactive console for iBoot (the apple bootloader). Most of you would have used iphuc, which uses iBoot. However, it's dependant on iTunes the mobile device library and can't get replies from iBoot, which results in one way communication, where you blindly say
cmd setenv foo, but you never know what happened.
With iBooter you can debug phone booting issues as well as run it in Linux/MacOS/Windows without iTunes installed. You can use iBooter to read memory/write memory, load ramdisks, change your wifi mac address, read files from nand and much more!
Where to get it You can get a copy of the binary from the following:
它提供了充分的双向沟通，你的iPhone ，一个大数目的命令。 You can use iBooter to read memory/write memory, load ramdisks, change your wifi mac address, read files from nand, and much more (see the commands list below).
你可以使用ibooter阅读记忆/写记忆，负载ramdisks ，改变你的WiFi MAC地址，请阅读档案从NAND ，以及更多（见命令名单如下） 。 With iBooter you can debug your iPhone’s booting issues, and the program works with Windows, Mac OS X, and even Linux.
与ibooter你可以调试你的iPhone的开机问题，并计划与Windows ， Mac OS X ，以及甚至Linux系统。
www.iphonelinux.org***************************************patch_list: 1801e850, patch_count: d=======================================:::: iBoot, Copyright 2007, Apple Inc.:::: BUILD_TAG: pwned-204.3.14:::: BUILD_STYLE: RELEASE::=======================================Command List Here is a command list for iBoot:
command list: help this list script run script at specific address go jump directly to address bootx boot a kernel cache at specified address diags boot into diagnostics (if present) tsys boot into tsys (if present) bdev block device commands image flash image inspection fs file system commands fsboot try to boot kernel at /kernelcache devicetree create a device tree from the specified address ramdisk create a ramdisk from the specified address halt halt the system (good for JTAG) reboot reboot the device poweroff power off the device md memory display - 32bit mdh memory display - 16bit mdb memory display - 8bit mw memory write - 32bit mwh memory write - 16bit mwb memory write - 8bit mws memory write - string crc POSIX 1003.2 checksum of memory printenv print one or all environment variables setenv set an environment variable clearenv clear all environment variables saveenv save current environment to flash run use contents of environment var as script bgcolor set the display background color setpicture set the image on the display iic iic read/write radio Manipulate the radio board. setbusclock Set bus clock to the given frequency in Hz. setcorevoltage Set core voltage to the given voltage in mV. syscfg flash SysCfg inspection charge Manage the charger chip. powernvram Access Power NVRAM. usb run a USB command chunk chunk a file
How to Change mac address Download
iBooter, connect to iBooter and type the following: (replace xx:xx:xx:xx:xx:xx with any mac address)
setenv wifiaddr "xx:xx:xx:xx:xx:xx"printenv wifiaddrsaveenvfsbootIt will look something like this:
Entering recovery mode, starting command prompt ] ] setenv wifiaddr "01:1c:b2:1c:2b:40" setenv wifiaddr "01:1c:b2:1c:2b:40" ] printenv wifiaddr wifiaddr "01:1c:b2:1c:2b:40" ] saveenv saveenv ] fsboot fsboot HFSInitPartition: 0x1806c298 Loading kernel cache at 0xb000000...data starts at 0xb000180 done gBootArgs.commandLine = [ ] usb_interrupt_write: No error------------------------------------------------------
你可能会发现上述附件无法下载，请自行添加代理服务器， 国内IP无法登录的
[
本帖最后由 角容 于 2008-4-9 14:19 编辑 ]
运行中]
